Nikon COOLPIX S9600, Reference Manual

Page: 205 / 226

T
ec
h
n
ical
No
tes an
d I
n
de
x
F
9
Camera turns off
without warning.
•
The camera automatically turns off to save
power (auto off function).
•
The camera or battery has become too
cold and cannot operate properly.
•
The inside of the camera has become hot.
Leave the camera off until the inside of the
camera has cooled, and then try turning it
on again.
•
The camera turns off if the USB cable
connecting it to a computer or printer is
disconnected. Reconnect the USB cable.
21
F
3
–
83, 86,
E
22
Monitor is blank.
•
The camera is off.
•
The camera has entered standby mode to
save power. Press the power switch,
shutter-release button,
c
button, or
b
(
e
movie-record) button, or rotate the
mode dial.
•
The flash lamp flashes while the flash is
charging. Wait for the flash to charge.
•
The camera and computer are connected
via the USB cable.
•
The camera and TV are connected via an
HDMI cable.
•
The camera and smart device are
connected using Wi-Fi connection and the
camera is operated by remote control.
20
1, 21
45
83, 86
83,
E
20
80
Monitor is hard to read.
•
Adjust the monitor brightness.
•
The monitor is dirty. Clean the monitor.
78,
E
65
F
6
Date and time of
recording are not
correct.
•
If the camera clock has not been set, the
“Date not set” indicator flashes during
shooting and movie recording. Images
and movies saved before the clock is set
are dated “00/00/0000 00:00” or “01/01/
2014 00:00” respectively. Set the correct
time and date from the
Time zone and
date option in the setup menu.
•
The camera clock is not as accurate as
ordinary watches or clocks. Periodically
compare the time of the camera clock
with that of a more accurate timepiece
and reset as required.
16, 78,
E
63
Problem Cause/Solution
A