VAA36001-R.3667.A
- A25 ･ S2 -
4
. Initial image data writing and Firmware upgrading
Device
・
AC adapter (EH-
63
)
・
SD card for firmware upgrading (capacity of approx.
16
MB)
×
1
[How to create an upgrading SD card]
1
) Format SD card on PC.
2
) Create a folder named "firmware" in the root directory of the SD card.
3
) Copy "firmware.bin" into the created folder.
4
) Copy "nanddat.bin" into the root directory of the same SD card.
Note) When only firmware upgrading is performed without replacing CP-
1
PCB, copying
"
nanddat.bin
"
into the
SD card is not necessary (because the initial image data is included in the CP-
1
PCB).
Write the data of initial images, and go on to upgrade the firmware.
Summary of Contents for COOLPIX S2 VAA36001
