![background image](http://html1.mh-extra.com/html/nikon/coolpix-s2-vaa36001/coolpix-s2-vaa36001_repair-manual_1691181020.webp)
VAA36001-R.3667.A
- A3・ S2 -
Screw [#
105
]
OK
NG
※
The metal plate hole must be fit to
the screw hole.
O-ring [#
048
]
Screw [#
105
]
・
As holding the button top unit [#
239
] from above, insert the sections "D" and "F" into the sections "E" and "G" of the
inner front cover unit [#
201
] respectively.
Button top unit [#
239
]
Inner front cover unit [#
201
]
Push it.
Section "D"
Section "E"
Section "F"
Section "G"
・
Fit the O-ring [#
048
] to the screw [#
105
] and tighten it.
<Tightening torque>
When assembling
newly
When reassembling
Screw [#
105
]
12
cN
・
m
12
cN
・
m
Note: The tightening torque value is set for the screw [#
105
]. Tighten the screw according to the set torque
value. (The tightening torque affects the waterproof function.)
The O-ring [#
048
] cannot be reused. Replace it with a new one.
Note:
In case the part, which is attached with the screw and O-ring,
is replaced, tighten the screw and O-ring by the torque for
assembling.
In the other cases, tighten them by the torque for reassembling.
Summary of Contents for COOLPIX S2 VAA36001
