21
Step 1 Turn the Camera On
The
Basic
s of
Shootin
g
and Playback
Turning the Camera On and Off
•
When the camera is turned on, the power-on lamp (green) lights and the
monitor is turned on (the power-on lamp turns off when the monitor is turned
on).
•
To turn off the camera, press the power switch. Both the monitor and the
power-on lamp are turned off.
•
To turn on the camera in playback mode, press and hold the
c
(playback)
button.
•
When
Record GPS data
in
GPS options
of the GPS options menu is set to
On
or while recording logs, GPS functions and log recording will continue to
operate even after the camera is turned off (
A
83).
C
Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will flash. If no operations are performed for another 3 minutes, the
camera will turn off automatically.
•
While the camera is in standby mode, the monitor is turned on again when any of the following
buttons is pressed.
➝
Power switch, shutter-release button,
A
(shooting mode) button,
c
(playback) button, or
b
(
e
movie-record) button
•
The time that elapses before the camera enters standby mode can be changed using the
Auto off
setting in the setup menu (
A
94).
•
By default, the camera enters standby mode in about 1 minute when you are using shooting
mode or playback mode.
•
If you are using the AC Adapter EH-62F (available separately), the camera enters standby mode
after 30 minutes. This setting cannot be changed.
C
Note on Battery Drain
Battery power drains faster than usual while the camera is recording log data (
A
89) or using a Wi-Fi
connection (
A
91).
Summary of Contents for COOLPIX AW1100
Page 39: ...En Reference Manual DIGITAL CAMERA ...
Page 79: ...13 l ___ ...
Page 295: ......
Page 296: ...FX2L01 4N 6MN1224N 01 Duplicated in Indonesia COOLPI COOLPIX AWII 0 ...
