Nikon COOLPIX AW1100, Quick Start Manual

Page: 268 / 299

F
10
Troubleshooting
Te
chni
cal
Not
e
s an
d In
de
x
Date and time of
recording are not
correct.
• If the camera clock has not been set (“Date not set” indicator
flashes during shooting), still pictures have a time stamp of
“00/00/0000 00:00”; and movies are dated “01/01/2013 00:00.”
Set the correct date and time using
Time zone and date in
the setup menu.
• The camera clock is not as accurate as a normal clock, such as
watches. Check camera clock regularly against more accurate
timepieces and reset as required.
22, 94,
E
69
94,
E
69
No information
displayed in
monitor.
Hide info is selected for Photo info under Monitor settings in
the setup menu.
E
71
Print date not
available.
Time zone and date in the setup menu has not been set.
22, 94,
E
69
Date not
appearing on
pictures even
when
Print date is
enabled.
• A shooting mode that does not support print date is selected.
• Another function that is set now is restricting the print date.
• The date cannot be imprinted onto a movie.
94,
E
73
60
–
Screen for setting
time zone and
date is displayed
when camera is
turned on.
Clock battery is exhausted; all settings were restored to their
default values.
23
Camera settings
reset.
Monitor is turned
off, and the power-
on lamp flashes
quickly. Battery temperature is high. Turn off camera, and allow battery to
cool down before resuming use. After the lamp flashes for 3
minutes, the camera turns off automatically, but you can also
press the power switch to turn it off manually.
21
Camera
temperature rises.
When functions such as movie recording or sending images
using an Eye-Fi card are used for a long time, or when the camera
is used in a location with a high ambient temperature, the
camera temperature may rise. This is not a malfunction.
79
Problem Cause/Solution
A