Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8G IF, Repair Manual, Page: 89 / 100

JAA78151－R.3584.A
- L67・AF-S VR 70-200/2.8G -
・Angle Difference Adjustment
・Gyro Gain Adjustment
Adjust the vibration width by the button for Gyro Gain Adjustment so that the length of the vibration width
becomes be less than 1/5 of the measured laser vibration width
α.
ＯＫ
ＮＧ
Buttons for [Angle
Difference] Adjustment
If there is angle difference, the laser beam source
becomes be whether if it rotates round even
performing the Gyro Gain Adjustment.
If it is possible to confirm the angle difference,
adjust it by the buttons for the angle difference
adjustment.
Notes
： After operating the adjustment button,
wait for a few seconds until a vibration motion is
stabilized.
Buttons for [Gyro
Gain] Adjustment
Peak section of the minimum value of the
vibration width
α
Standard: Less than 1/5 of the vibration width α
Notes
： The laser beam vibrates widely again after it passes
the peak section of the minimum value.
INC