Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8G IF, Repair Manual, Page: 73 / 100

JAA78151-R.3584.A
- L56-11 AF-S VR 70-200/2.8G IF - May 17 2007
Added page
①
Click "Start insp.". The inspection of lens driving stop accuracy starts.
②
If the lens stops during the inspection, input a figure [from "0" to "1000" (msec: millisecond) to delay
the process] which prevents stopping the lens, into the below "Delay time" entry field.
①
Make this inspection on both focal length70mm (W) and 200mm (T) at the following five lens positions.
(3) Inspection screen of lens driving stop accuracy
(Lens position when inspecting)
Tilt of Lens
Position of index window
Horizontal Up / Right / Left
Front lens group 90° angle upward
Front lens group 90° angle downward
Note:
The delay time is the setting value set by the adjustment software. So, if the lens does not stop during
"Inspection of Lens Driving Stop Accuracy" in the end, any value can be input without problem.
However, the larger the value of "ADJUST DELAY-TIME" gets, the longer the inspection time
becomes.
Entry field
Tick the checkbox when
Front lens group 90° angle
upward/downward
INC