Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8G IF, Repair Manual, Page: 57 / 100

JAA78151-R.3584.A
- L51 ･ AF-S VR 70-200/2.8G -
NIKON AF-S ZOOM LENS(NEW)INSPECTION ／ ADJUSTMENT PROGRAM. ［J18342］
１．ADJUSTMENT FOR MR DUTY. ９．
２．ADJUSTMENT FOR FREQUENCY & CONTOROL. Ａ．
３．READ AND REWRITING OF EEPROM DATA. Ｂ．
４．OPERATION OF MR ENCODER. Ｃ．
５．LENS DRIVING STOP ACCURACY. Ｄ．
６．LENS SERVO TIME. Ｅ．
７．SWITCHES AND LENS CONDITION. Ｆ．
８． Ｇ．RETURN TO THE SYSTEM.
SELECT THE DEMANDED ARTICLE BY 〈－ －〉 KEY, AND PUSH ENTER KEY. OR,SELECT
COMMUNICATE BY RS232C TERMINAL.
THE DEMANDED ARTICLE BY ITS NUMBER. FOR IBM PC/AT DOS/V CLONE.(486-PENTIUM3)
COPYRIGHT(C)2003-02-05 NIKON CORP.
BORLAND C++ VERSION 3.1 COPYRIGHT(C)1992 BORLAND INTERNATIONAL.
・
Menu items
The items 1 and 2 are used for adjustment.
The item 3 is used for reading and writing EEPROM DATA.
The items 4~7 are used for inspection.
・
Selection of item
After selecting any item, one of the lens selection display, the focal length selection display, the voltage setting
display, the inspection start display, etc. appears. The displays are different for the items. Obey the instructions
of a personal computer.
・
Operating voltage
●
Explanation of the AF-S zoom lens (New) inspection program
（１）
Menu display
・
Initial driving
When "WAIT FOR SOME SECOND" is displayed, execute initial driving (repeat scanning five times and stop at
infinity end).
Power supply for AF motor in lens Power supply for AF-I
communication box
Inspection of MR encoder operation
６． ０±０． １Ｖ
Inspection of lens servo stop accuracy
６． ５±０． １Ｖ ５． ５±０． ２Ｖ
Inspection of lens servo time
６． ５±０． １Ｖ
Inspection of switches and lenses
６． ０±０． １Ｖ
INC