manualshive.com logo in svg

Nikon 25040 - Coolpix 300 Digital Camera, User Manual, Page: 99 / 116

Share
Download
Nikon 25040 - Coolpix 300 Digital Camera User Manual Download Page 99

85

Connections : Making a SCSI Connection

Once you have connected your camera to the SCSI chain, turn on the
camera and other external SCSI devices and then turn on the computer. If
you have installed the Nikon View software provided with your COOLPIX
300, you will now be able to use the software to view the contents of the
camera’s memory or to transfer images and recordings to disk for long-
term storage. Refer to the Nikon View User’s Manual.

Note:

While your COOLPIX 300 is being controlled by Nikon View, the

camera’s touch-panel display will not respond to the stylus and the record
and shutter-release buttons will be deactivated.

Caution:

When turning the computer off, turn the computer off before

turning off any peripheral devices. Remove the SCSI cable from the
camera and computer only after both devices have been turned off.  When
removing the cable from the camera, care should be taken not to damage
the latches that hold the cable in place.  Unplug the cable by the
connectors; do not pull on the cable itself.  Do not bend or twist the cable,
as this may cause the cable to break.

Summary of Contents for 25040 - Coolpix 300 Digital Camera





















































































































Reviews:

No comments