Nikon 1541, User Manual

Page: 360 / 500

338
U
h
I
Disable/
enable
If the flash is currently off, front-curtain sync will be
selected while the
Fn button is pressed. If the flash is
currently enabled, it will instead be disabled while the
Fn
button is pressed.
1
Bracketing
burst
If the Fn button is pressed while exposure, flash, or
ADL bracketing is active in single frame or quiet
shutter-release mode, all shots in the current
bracketing program will be taken each time the
shutter-release button is pressed. If white balance
bracketing is active or continuous release mode
(mode
C
H
or C
L
) is selected, the camera will repeat the
bracketing burst while the shutter-release button is
held down.
4 + NEF (RAW)
If image quality is set to JPEG fine , JPEG normal , or
JPEG basic , “RAW” will be displayed in the rear
control panel and an NEF (RAW) copy will be recorded
with the next picture taken after the
Fn button is
pressed (the original image quality setting will be
restored when you remove your finger from the
shutter-release button). NEF (RAW) copies are
recorded at the settings currently selected for
NEF
(RAW) recording in the shooting menu (
0
304). To
exit without recording an NEF (RAW) copy, press the
Fn button again.
L
Matrix
metering Matrix metering is activated while the Fn button is
pressed.
M
Center-
weighted
metering
Center-weighted metering is activated while the Fn
button is pressed.
N
Spot metering
Spot metering is activated while the
Fn
button is
pressed.
b
Viewfinder
grid display Press the Fn button to turn the framing grid display in
the viewfinder on or off ( 0 10).
!
Viewfinder
virtual horizon Press the Fn button to view a virtual horizon display in
the viewfinder ( 0 340).
Option Description