11
3. Put down and leaving the caterpillar
-
Lower the accessory equipment completely via joystick
-
For turning the caterpillar of lower the rotational speed via hand throttle lever
on “condition gas”
-
Push the Stop-button above for activating the wedging brake and to switch of
the joystick
-
Turn the ignition key left against clockwise (into vertical)
Attention:
- When sticking on and taking the hydraulic packings off the system should be
made pressure-free.
- Switch the ignition on and operate empty with working joystick in all levels
- Consequentely the hydraulic connectors get depressurized
Attention:
Before, all safeguards must be met as when starting or turning off the
caterpillar!!!
Summary of Contents for Caterpillar HY 60
