DE
40
10-845
10.8. Verschlüsselung einstellen
Programmierung einleiten
falls noch nicht erfolgt
Wert eingeben
*7 # Wert #
(WE = 1)
= 0 Bilder werden als BMP-Datei gespeichert
= 1 Bilder werden verschlüsselt gespeichert
7
Verschlüsselung eingestellt
Ein positiver Quittungston ertönt. Die gelbe LED leuchtet 3 s lang. Danach
blinkt die gelbe LED.
ungültiger Wert
Ein negativer Quittungston ertönt beim Drücken der #-Taste. Die gelbe LED
blinkt für 3 s schnell und blinkt dann wieder.
10.9. Alle Bilder löschen
Programmierung einleiten
falls noch nicht erfolgt
Mastercode eingeben
*94 # Mastercode # Mastercode #
Mastercode = 6-stellige Zahl (eigener Mastercode oder Werkseinstellung)
9
4
alle Bilder gelöscht
Ein positiver Quittungston ertönt. Die gelbe LED leuchtet 3 s lang. Danach
blinkt die gelbe LED.
Alle Bilder in den Verzeichnissen auf der SD-Karte sind gelöscht. Dieser
Vorgang kann einige Minuten dauern.
falsche Eingabe,
unbekannter Mastercode
Ein negativer Quittungston ertönt beim Drücken der #-Taste. Die gelbe LED
blinkt für 3 s schnell und blinkt dann wieder.
10.10. Mastercode ändern
Programmierung einleiten
falls noch nicht erfolgt.
Mastercode eingeben
*98 # alter Mastercode # neuer Mastercode # neuer Mastercode #
Mastercode = 6-stellige Zahl
Ändern Sie aus Sicherheitsgründen den werksseitig
voreingestellten Mastercode bei der Inbetriebnahme.
9
8
Mastercode geändert
Ein positiver Quittungston ertönt. Die gelbe LED leuchtet 3 s lang. Danach
blinkt die gelbe LED.
falsche Eingabe,
unbekannter Mastercode
Ein negativer Quittungston ertönt beim Drücken der #-Taste. Die gelbe LED
blinkt für 3 s schnell und blinkt dann wieder.
10.11. Datum einstellen
Programmierung einleiten
falls noch nicht erfolgt
Datum eingeben
*95 # YY # MM # DD # Format #
YY = Jahr, MM = Monat, DD = Tag (Jahr: ab 2000)
Format (WE = 0)
= 0 DD.MM.YYYY
= 1 MM.DD.YYYY
= 2 YYYY-MM-DD
9
5
Datum eingestellt
Ein positiver Quittungston ertönt. Die gelbe LED leuchtet 3 s lang. Danach
blinkt die gelbe LED.
ungültiger Wert
Ein negativer Quittungston ertönt beim Drücken der #-Taste. Die gelbe LED
blinkt für 3 s schnell und blinkt dann wieder.