background image

11

10-821-01

4. tECHNICaL Data

Supply voltage ............................................. +24V ±8%
Cover .......................................................... flush mounting
Dimensions ................................................. W51mm; H51mm; D22mm
Weight ........................................................ 30g
Operating temperature ................................. -20 to +50°C
Input impedance J1 (terminal resistor) ........... 100Ω
Input current ................................................ I(a)=0,0mA; I(Pmax)=55mA
Signal gain .................................................. 0dB to +12dB* (linear)
Max. output signal ........................................ 4Vpp* 
* in case of 1Vpp at the input and terminal resistor of 100Ω (J1)

5. LEGaL WaRNINGS

- The installation has to be carried out by a qualified person and in compliance with the 

statutory regulations.

- This user manual has to be handed over to the user. It has to be included in the electri-

cal installation file and has to be passed on to any new owners. Additional copies are 
available on the Niko website or via the support service.

- During installation, the following has to be taken into account (not limited to list 

below):

  - The statutory laws, standards and regulations;
  - The state of the art technique at the moment of installation;
  - This user manual, which must be read within the scope of each specific installation, 

only states general regulations;

  - The rules of proper workmanship
- In case of questions, you can consult Niko’s support service or contact a registered 

control organisation.

  Support Belgium: 

Support UK

  +32 3 778 90 80 

+44 1525877707

  website : http://www.niko.be 

website: http://www.nikouk.com

  e-mail: [email protected] 

e-mail: [email protected]

In case of a defect, you can return your product to a registered Niko wholesaler, together 
with a clear description of your complaint (Conditions of use, stated defect…).

6. GUaRaNtEE PRoVISIoNS 

- Period of guarantee: 2 years from date of delivery. The delivery date is the invoice date 

of purchase of the product by the consumer. If there is no invoice, the date of production 
applies.

- The consumer is obliged to inform Niko in writing about the defect, within two months 

after stating the defect.

- In case of a failure to conform, the consumer has the right to a repair or replacement 

(decided by Niko) free of charge.

EN

Summary of Contents for 10-821-01

















Reviews: