![background image](http://html1.mh-extra.com/html/niko/10-576/10-576_product-information_1689553065.webp)
65
EN
10-576
Function key
Without menu: switch light (factory settings, control function 8, internal calls, …, ring-and-
come-in, call diversion)
In all menus: close menu
Menu key
Short press
standby: open start menu screen memory or main menu
a)
Parameter menu image, ringtone or time setting active: select to be modified parameters
Menu main menu, internal call, control function or display short message active: confirm
selection
Hold down** (longer than 4 sec.)
Activate/deactivate central screen memory
Navigation key up
Short press **
Parameter menu screen or ringtone active: increase value of the selected parameter
Main menu active: one menu point to the right Screen memory mode, display active: show next
image
a)
Display video image: save image manually
a)
Speak without active video image: increase speech volume
Press and hold (> 8 sec.), together with navigation key down
Load factory settings
Navigation key down
Short press **
Parameter menu screen or ringtone active: decrease value of the selected parameter
Main menu active: one menu point to the left
Screen memory mode, display active: show previous image
a)
Display video image: save image manually
a)
Speak without active video image: decrease speech volume
Hold down** (longer than 4 sec.)
Screen memory mode, display active: remove image
a)
Press and hold (> 8 sec.), together with navigation key up
Load factory settings
LED display, red
Is on
: call-OFF has been activated
Flashes, OFF
: automatically opening the door or call diversion has been activated
LED display, green
Is on: incoming door call or internal call, speech active
Flashes
: new images were recorded
a)
or there are new short mes-sages
Flashes 3 x
: display audio / video channel assigned
a)
only when a 10-845 is installed
*
if light switch function in the external unit is activated
**
key function differs if permanent image connection has been configured upon request of the customer.
This option can be activated or deactivated in the EEPROM.
Press key briefly: open main menu
Hold key down (> 4 sec.): activation / deactivation of the screen memory
Hold key down (> 8 sec.): open image settings menu
5.4. Technical data
Power supply voltage
+24 V ± 8 % (power supply and control device)
Housing
plastic, white
Dimensions (in mm)
H 186 x B 101 x D 20
Weight
230 g
Allowable ambient temperature
-5 ... +40°C
Protection degree
IP30
Input current in standby
6-wire operation: I(a) = 0,04 mA, I(P) = 13,5 mA
Maximum input current
I(Pmax) = 130 mA
Video module
TFT display (colour)
Screen diagonal
8.9 cm (3.5 inch)
Resolution
320 x 240 pixels
Video signal input
symmetric 1Vss FBAS
Floor video input
asymmetric 1Vss FBAS
6-wire technology required
yes
Summary of Contents for 10-576
Page 2: ...10 576 03 Nederlands 23 Français 43 Deutsch 62 English 82 Slovenčina ...
Page 102: ...Notes 10 576 ...
Page 103: ...10 576 ...