31
6. Storing
When storing the attachment with the hook of the pipe cap attached to the pipe,
etc., do not pull or swing the attachment.
When handling the trimmer blade, wear gloves.
* If you touch the edge of the trimmer blade or tip of the sharp blade, it could cause injury
to hands or fingers.
When storing the hedge trimmer attachment, install the trimmer blade guard
on the blade and place it out of the reach of children.
Note
●
Do not discard grease into the river, the sea, or the ground.
Otherwise, it could pollute the environment.
After working or when storing, follow the procedure below.
For directions after the powerhead operation is completed or storing method, refer to the powerhead
manual.
Remove the attachment from the
powerhead.
Insert the hanging hook [3] of the pipe
cap [2] into the hole of the shaft tube
[1].
Insert the pipe cap [2] into the shaft
tube [1].
Put on gloves.
Clean and check the trimmer blade
according to “5.1.1 Inspection of
Blade” and
“
5.3.1 Removal of Foreign
Objects."
Clean the attachment. Wipe off the dirt or stain with a cloth, etc.
[2]
[1]
[3]
1
2
[2]
[1]
3
4
5
6
Summary of Contents for SSHH
Page 36: ...36 MEMO...
