NIKKARI Hedge Trimmer NTP-26, NTP-26H, NTA-26N, NTA-26HN, NTA-35N, NTA-35HN
E3498-0
|
19
3. Installation and Adjustment
3.1 Assembly of Engine
Set the clutch housing [1] to the
engine.
Fix the clutch housing with the bolt
(4pcs) [2].
Note
●
Some models are shipped with the engine installed.
3.2 Assembly of Handle
■ NTA-26N, NTA-26HN, NTA-35N, NTA-35HN
Wind the handle rubber [2] around the
main pipe (closer to the trimmer side
than the distance collar [1] position).
Set the loop handle bar [3] to the
handle rubber [2] so that the barrier [4]
should be on the left side.
Set the loop handle [5] from the upper
side.
Tighten the bolt [6] and washer [7] from
the top of the loop handle. (4 points)
1
2
[6]
[7]
[5]
[2]
[3]
[4]
1
2
3
[1]
4
This is a manual downloaded from the web site.
Explanation in the manual which comes together with your purchased product may differ from your product. Use the manual for reference.
