TM Eco Series
Operating & Safety Instructions
USA – 07/11
Issue 01
2
1
Introduction and General Information
1.1
FOREWORD
The purpose of these manuals is to provide the customer with proper safety operating and
maintenance instructions essential for proper machine operation.
All information in these manuals should be
READ
and fully
UNDERSTOOD
before any attempt is made
to operate the machine.
THESE MANUALS ARE VERY IMPORTANT TOOLS
- Keep them with the
machine at all times.
The manufacturer has no direct control over machine application and use, therefore
conformance with good safety practices is the responsibility of the user and his operating
personnel.
All information in these manuals is based on the use of the machine under proper operating
conditions. Alteration and/or modification of the machine are strictly forbidden.
One of the most important facts to remember is that any equipment is only as safe as those
who operate it.
DANGER, WARNING, CAUTION, IMPORTANT, INSTRUCTIONS AND NOTICE
Any place these topics may appear, either in this manual or on the machine, they are defined as
follows:
DANGER:
If not correctly followed there is a high probability of serious injury or death to personnel.
WARNING OR CAUTION
:
If not correctly followed there is some possibility of serious injury or death to
personnel.
THE
'SAFETY ALERT'
SYMBOL IS USED TO CALL ATTENTION TO POTENTIAL
HAZARDS THAT MAY LEAD TO SERIOUS INJURY OR DEATH, IF IGNORED.
IMPORTANT AND INSTRUCTIONS:
Denotes procedures essential to safe operation and prevention of
damage to or destruction of the machine.
NOTICE:
Indicates general safety rules and/or procedures relating to the machine.
It is the owner's/user's responsibility to know and comply with all applicable rules,
regulations, laws, codes and any other requirements applicable to the safe use of this
equipment.
Summary of Contents for TM34M ECO Series
Page 2: ......