www.nkrowing.com.au
3
INSTALLING THE STROKECOACH DOCK
Next you will mount the plastic dock on the end of the StrokeCoach
wiring to the front of the installed mounting bracket or directly to
the mounting location chosen. If installing the docking station on
a T-Bracket, you may use a cable tie to secure the harness wires so
they will stay out of the way when you are strapping your feet into
your shoes.
1) Clean the mounting location thoroughly with an alcohol prep
pad.
2) Peel the liner from the VHB tape on the wiring dock;
3) Align the dock on the mounting bracket or location and press
firmly. Be sure to support the mounting bracket from behind while
pressing the dock into place.
MOUNTING THE STROKECOACH
Slide the StrokeCoach display unit onto the docking station until it
clicks. Be sure that the lanyard is out of the way.
NOTE
: To prevent the loss of your StrokeCoach in the event that it is
bumped while you are rowing, loop the lanyard around the top of the
T-bracket or some part of your shell and slip the StrokeCoach through
the loop. (The lanyard is designed specifically for this purpose.)
