31
III. OPERATION
Remove Daily Carbon Build-up: Belts & Plates
Clean: DAILY
Incendalyst
™
Clean: DAILY
Discharge End
1. Remove carbon build-up from belts and
plates by scraping with supplied cleaning
tools and brushes, or equivalent.
Instructions
Tools
Top
1. Lift Incendalyst
™
up and off.
2. Rinse clean with water only. The Incendalyst
™
may be soaked, then rinsed if needed.
3. Shake out excess water thoroughly.
CLEAN WITH WATER ONLY!
Instructions
Tools
3-Compartment Sink
!
CAUTION: EXTREMELY HOT.
Allow to cool before handling.
D12
D11
CAUTION: EXTREMELY HOT.
Allow to cool before handling.
Cleaning & Disassembly Guide
Airbox Wrench/
Belt Scraper Tool
Shaft Cleaning Tool
