22
III. OPERATION
ALL PARTS ARE CLEANED ON A DAILY BASIS UNLESS OTHERWISE NOTED
Follow the steps for proper disassembly. Reverse the order for reassembly.
WARNING
BROILER PARTS ARE HOT.
DON’T ATTEMPT TO DISASSEMBLE
THE BROILER UNTIL IT IS FULLY
COOL. FAILURE TO FOLLOW
THIS INSTRUCTION MAY RESULT
IN SEVERE INJURY.
CAUTION
FOLLOW THE DISASSEMBLY AND
REASSEMBLY STEPS TO ENSURE
PROPER OPERATION OF THE
BROILER.
FAILURE TO DO SO MAY RESULT
IN OPERATIONAL PROBLEMS.
WARNING
LEAVE THE VENTILATION HOOD
ON DURING COOLING.
FAILURE TO DO SO COULD POSE
A FIRE SAFETY HAZARD.
How To Read The Cleaning Section
The location of the part
When to clean the part
Picture of the part to be
removed and cleaned
How to remove and
clean the parts
The tools needed
to clean the part
The name of the part to be cleaned
Every 4 Hours
Daily
Weekly
Monthly
Step in Cleaning Chart
Frequency Color Code
• Turn broiler off and close
the main gas valve.
• Disconnect the power supply
to the broiler before cleaning
or servicing.
• Allow to cool for 30 minutes
prior to cleaning/disassembly.
• Leave the ventilation system
on during cooling.
• Use only approved cleaning,
degreasing and sanitizing
solutions.
• If this broiler is connected using a
restraint, and disconnection of the
restraint is necessary for cleaning
or moving the broiler, the restraint
must be reconnected after the
broiler has been returned to its
originally installed position.
Cleaning & Disassembly Guide
