Nieco 922G, Owner'S Manual

Page: 17 / 32

17
FROM THE LEFT SIDE OF THE BROILER
9. Remove the Burner Access Cover. 9 10
10. Slide the Lower Burners out and
remove the Protective Shields.
Clean the shields by scraping off
any built up residue, then soak in
soap and water. Clean the shields
daily. This will help to prolong
the life of the burner and keep
the broiler cooking properly.
FROM THE BACK OF THE BROILER
11. Remove the awning by lifting up 11 12
and off. Clean using soap and
water.
12. Remove the Return Pan by lifting
off the pegs and sliding out. Clean
and sanitize the pan and the
Teflon Sheet. The Teflon Sheet
can be flipped over if one side
becomes worn.
13. Remove the Stripper Blade. 13 14
Scrape any built up residue
from the blade. Clean by soaking
in soap and water. Sanitize.
14. Remove the Lower Burner
Reflector. Notice the position
of the piece before removing it,
so that you can re-install it
properly. Clean by soaking
in soap and water.