18
WEEKLY CLEANING
15. Remove the Lower Burners
15
through the access hole in
the side of the broiler.
Clean the Distributor Screen
and Venturi in the same fashion
as the Upper Burners. Refer
to instruction 16 below.
16. Remove the Upper Burners
16
and clean as follows:
A. Remove Reverberator and clean
with a stiff bristle brush.
REPLACE REVERBERATOR AT
THE FIRST SIGN OF BREAKAGE.
DO NOT SOAK OR SUBMERGE THE BURNERS IN WATER. WATER WILL DAMAGE THE GASKET SEAL CAUS-
ING IMPROPER BURNER PERFORMANCE.
17. Wipe off the frame and other internal parts of the broiler. Do not spray anything (i.e. oven cleaner) inside the broiler.
B. Clean Burner Screen with a stiff
bristle brush.
HOLD BURNER WITH THE SCREEN
FACING DOWN WHILE BRUSHING.
This prevents particles from dropping
down and lodging inside the burner.
C. Clean Burner Venturi with a stiff
bristle brush.
HOLD BURNERS SO THAT PARTI-
CLES WILL NOT DROP INSIDE.
Summary of Contents for 922G
