Paso 8 — Battery enclosure installation
1 x Acrylic tube (200 mm)
1 x Motors sub-assembly
The bottom clamps must have the non-slip tape, as shown in the picture.
Put the battery enclosure on the bottom clamps. The front end cap must be resting on the front
mounts as shown in the picture 2.
Sibiu Nano - Assembly Manual (English)
Borrador: 2019-01-22
ID de guía: 20 -
Este documento fue generado el 2019-10-04 02:18:54 AM (MST).
© 2019
nido.dozuki.com/
Página 10 de 31