Paso 29
Install the front thrusters with the cable curving inwards and pass them through the clamp slot.
Install the back thrusters with their cable curving outward and into the tube, as seen in the second
picture.
Install the center thrusters with their cable facing inwards, at approximately 45º, so that the cable
get hidden under the main top structure.
Paso 30 — Thursters installation and wiring
After installing the thrusters and the lights, put the top sub-assembly in its position.
Do you remember the slots in the clamps in picture 2? They will guide the cables safely away from
the propellers.
The cables should look like the picture 3.
Sibiu Nano - Assembly Manual (English)
Borrador: 2019-01-22
ID de guía: 20 -
Este documento fue generado el 2019-10-04 02:18:54 AM (MST).
© 2019
nido.dozuki.com/
Página 24 de 31