Nidek Medical RT-5100, Service Manual

Page: 66 / 76

MRT10*RDA001A/E
7 - 4
7.6 Parameter setting
1. Press [Para.] on the Main Menu screen.
2. The Parameter screen appears.
3. Select the desired item to be changed.
4. Follow the procedures below to change the
page of the Parameter screen.
1) Pressing [Back]: displays the previous
page.
2) Pressing [Next]: displays the next page.
3) Pressing [Nex] on the last page of the
screen displays the first page of the screen.
4) Pressing [Back] on the first page of the
screen displays the last page of the screen.
7.7 Printing the adjustment value
1. Printing the Status Information.
1) Enter the Information / Adjustment
screen. (See 7.1.)
2) Press [Status Information] to print the
status information.
2. Printing the initial pulse for the MB
1) Enter the Information / Adjustment
screen. (See 7.1.)
2) Press [Pulse for MB Initialize] to print the
initial pulse for the MB.
7.8 Resetting the setup data
1. Enter the Information / Adjustment screen. (See 7.1.)
2. Press [Reset the Setup Data].
3. The Reset the Setup Data window appears.
4. Pressing [Yes] return the value to the setup data.
* Both the AR and LM data are also cleared.
5. Select the chart. (See 7.3.)
Adjusting for Mirror (SSC)
End
Status Information
㧹㧮ೋᦼࡄ࡞ࠬ
Ꮏ႐಴⩄ߩ⸳ቯߦᚯߔ
Other Brand AR/LM comm.
Chart Selection
Adjusting for Chart / Mask
Information / Adjustment
Yes No
Reset the Setup Data
Do you initialize the setup
data?
SPH step
CYL mode
AXIS step
SPH step (Shift)
CYL step (Shift)
AXIS step (Shift)
AXIS auto step
Cross cylinder (XC) test
XC mode S.E. fix
CYL mode S.E. fix
Back Next End
0.25 D
䋭
5
1.00 D
1.00 D
1→5 / 5→1
0.00 D
Auto
Yes
No
Parameters Page : 1