Nidek Medical RT-5100 Service Manual Download Page 65

Page: 65 / 76

MRT10*RDA001A/E

7 - 3

7.3 Chart selection

1. Enter the Information / Adjustment screen. (See 7.1.)
2. Press [Chart Selection] to enter the Chart

Selection screen.

* The chart type that is selected at present

is displayed on the screen.

3. The desired chart type can be selected by

pressing the chart type.

* When connecting the SSC-300 series,

select the SSC-330 series.

4. Press [Clear] or turn the power off and on

to change the setting to the specified chart
type.

7.4 Chart adjustment

1. Enter the Information / Adjustment screen. (See 7.1.)
2. Press [Adjusting for Chart / Mask].
3. Adjust the chart position.

1) Pressing the up-arrow button on the Chart

side: The chart moves upward.

2) Pressing the down-arrow button on the

Chart side: The chart moves downward.

4. Adjust the mask position.

1) Pressing the up-arrow button on the Mask

side: The mask moves upward.

2) Pressing the down-arrow button on the

Mask side: The mask moves downward.

5. Pressing [End] returns to the Adjusting

for Chart / Mask screen.

7.5 Mirror adjustment

1. Enter the Information / Adjustment screen.

(See 7.1.)

2. Press [Adjusting for Mirror (SSC)] to enter

the Adjusting for Mirror (SSC) screen.

* When the chart other than the SSC is

selected, this screen cannot be entered.

3. Move the RT head to the upper limit so that

the chart can be seen in the middle, and press
[Set].

4. Pressing [End] returns to the Adjusting for

Chart / Mask screen.

SSC-300/330 type...

CP-670 type...

SSC-330 type U

Chart Selection

2TGUU=%NGCT?MG[CHVGTUGNGEVKPIEJCTV

CP-690 type...

Adjusting for Chart/Mask

Chart

Mask

End

Adjusting for Mirror (SSC)

Adjust the SSC mirror.
Move the RT head up or down so the chart is seen
in the window.
Then press [Set] key.

End

Set

Summary of Contents for RT-5100













































































Search results

Summary of Contents for RT-5100

Reviews:

Related manuals for RT-5100

Brands by name

Popular brands

Nidek Medical RT-5100, Service Manual

Search results

Summary of Contents for RT-5100

Reviews:

Related manuals for RT-5100

Brands by name

Popular brands