Nidek Medical RT-5100 Service Manual Download Page 25

Page: 25 / 76

4 - 15

MRT10*RDA001A/E

4.3.4 “Chart doesn’t work.” appears.

Connect the chart projector.

Is the chart projector connected?

Is the power of the chart projector ON?

Does the communication cable break?

Do you try to change the chart while the chart is
moving?

It is recommended not to change the chart while the
chart is moving.

Turn ON the power of the chart projector.

Replace the communication cable.

Yes

Replace the RB I/F board (34085-BA22). (See 6.27.)

Is the symptom relieved?

Replace the RB main board (34085-BA21). (See 6.26.)

Yes

Is the chart projector applied to, or set for the RT-
5100?

Yes

Change the chart projector to the one applied to the
RT-5100, or change the setting of the chart projector to
the applied one.

Does cable CB break?

Replace cable CB.

Yes

Completion

Summary of Contents for RT-5100













































































Search results

Summary of Contents for RT-5100

Reviews:

Related manuals for RT-5100

Brands by name

Popular brands

Nidek Medical RT-5100, Service Manual

Search results

Summary of Contents for RT-5100

Reviews:

Related manuals for RT-5100

Brands by name

Popular brands