Page 9 of 13
9
[Condition] Menu
[Trigger]
Sets trigger force to begin measurement
[Time]
Sets x-axis measurement increments, 0.5 second to 10 minutes
[Weight]
Sets y-axis measurement increments (g/kg, N or lb.)
[COM Port…] Selects COM Port for input from force gauge
[Trigger]
1.
Select [Trigger] as described above in “[Condition] Menu”.
2.
[Mode] Select appropriate mode:
[None]: Continuous
recording.
[Single]:
Measures one triggered six-interval time measurement.
[Continue]: Continuous triggered six-interval time measurements.
3.
[Direction] Select the appropriate direction. [Up] direction triggers on increase in
force, positive slope, while [Down] triggers on decrease in force, negative slope.
4.
[Load Level] Select the value of force to begin triggered measurements.
5.
[Time Position] Begins triggered measurement on selected x-axis interval. Displays
previous intervals prior to trigger after measurement is complete.
6.
[Range] Informs user that only intervals 1 through 6 may be selected.
[Direction
[Mode]
[Load Level]
[Time Position]
[Range]
