Nidec POWERDRIVE FX 100T, Installation Manual

Page: 27 / 40

27
OPTIONS
POWERDRIVE FX Installation guide
4729 en - 2017.08 / c
5.1.3 - MDX-Powerscreen
5.1.3.1 - General
The interface is a touch screen which can be used to access
various menus. It is supplied with its own connection cable
(2 metres).
After the loading phase following powering-up of the drive, the
parameter-setting interface displays the screen below.
Ref. Function
A 4.3” touch screen
B Touch-sensitive button for access to the main menu
C
"PWR" LED, indicates the state of the interface
power supply
D
Touch-sensitive buttons for language selection
(can take a few minutes to load)
5.1.3.2 - Architecture
From the welcome screen, press the button to access the
main page of the parameter-setting interface, consisting of 5
touch-sensitive buttons:
- Information : Can be used to obtain information very quickly
about the drive, the fieldbus option, the parameter-setting
interface, and can also be used to select the language.
- Read mode : Is used to display the status of the drive when
stopped or during operation, as well as its main measurement
points.
- Setting : Used for reading and/or modification of all the drive
parameters, as well as to set the date and time on the display.
- Control via keypad : Gives dirtect access to motor control
via the touch screen (Run/Stop, direction of rotation, speed
reference). These screen parameters can be set using the
Parameter setting/Parameter setting via the keypad menu.
Control via the keypad is disabled in factory-set configuration.
- Trip history : Gives a quick overview of the drive's last 10
trips.
- : This button is accessible from all screens in factory-
set configuration and is used to give a stop command (can be
disabled).
At any time and regardless of the screen displayed, the
button can be used to return to previous pages, as far as the
interface main page.
For further information, see the commissioning manual
ref.4617.
5.1.3.3 - Installation
The interface is through-panel-mounted in the front of a
cabinet (IP65/NEMA 4 pounting).
94 mm
102 mm
120 mm
128 mm
Plan de découpe
5.1.4 - MDX-SOFT
The MDX-SOFT enables parameter setting or supervision of
the POWERDRIVE FX from a PC. Numerous functions are
available:
- Fast commissioning
- LEROY-SOMER motor database
- File saving
- Online help
- Comparison of 2 files or one file with the factory settings
- Printing of a complete file or differences compared to the
factory settings
- Supervision,
- Diagnostics
To connect the PC to the POWERDRIVE FX, use an
"MDX-USB Isolator" isolated USB cable.
This software can be downloaded from the Internet at the
following address:
http://www.emersonindustrial.com
Powerdrive FX can be set via the USB connector, even if the
drive is not powered.
Attention. In this case, options modules will not be powered
and settings will not be saved. To make an option module
setting / backup , it is necessary to provide an auxiliary power
supply.