●Is the wheel plugged in to the power source?
●Is the power switch in the "on" position?
●Is the power source working correctly and supplying the correct amount of electrical current?
●Is the lever handle at the "0" position ?
●Are there several wheels or other equipment/appliances on the same circuit?
(Check the breaker to see if the circuit has been overloaded.)
●Is the wheel resting on a solid surface and level?
●Is there too much clay on the wheelhead?
●Is the clay totally centered?
●Did the wheel stop turning due to too much clay on the wheelhead?
●Did an overload cause the breaker to open at the main power source?
●Has the power cord become unplugged?
●Is the Power Switch in the off Position?
Troubleshooting
Problem
Problem
Problem
Wheelhead does not turn
Unusual sound coming from the wheel body
The wheelhead stops turning
Model
RK-5T
Motor
100W AC230V 50Hz single phase*
Drive System
Brush DC Motor with electric speed control
Wheelhead speed
0
～
230rpm
Speed control
Lever Handle or Foot Pedal
Wheelhead Direction
Clockwise/ Counter-Clockwise
Wheelhead
Plastic table, diameter 250mm
Dimension
365 × 515 ×230mm
Ship Weight
12kg
Specifi cations
*There are a couple of different motor specifi cations based on the country.
Please refer to the nameplate on the product for detail specifi cation.
:1 Terada Kotari, Nagaokakyo-city, Kyoto, 617-0833 Japan
Phone: 81-75-958-3608 FAX:81-75-958-3647
