- 4 -
Please do not use this wheel with
any voltage or frequency other
than what is indicated.
①
Put splash pan and turn to the left.
①
Install pins adjusting the position.
Do not connect many power
cables to the same outlet.
Make sure the power switch is off
when you plug the power cable
into the AC outlet.
If water or clay is filled over this
line, it overflows to the inside.
Please be sure to fix pins firmly
not to be unhooked.
Confirm that you have the
correct line voltage and
then insert power plug into
the power outlet.
Press the lever handle all the way
back before turning the power
switch off.
Do not operate any switches with
wet hands.
The wheelhead will not move if the lever
handle was not all the way back at last
power off.
Splash Pan Installation
Weelhead Installation
Power Connection
Operation Warning
