- 6 -
Turn the power switch off and unplug
the power cable for cleaning, testing
or adjustment. (It is recommended to
do the same if the wheel will not be
in use for a long period.)
DO NOT POUR WATER ON THE
WHEEL TO CLEAN IT.
Wipe the wheel down with a damp sponge
or cloth. (Splash pan can be cleaned if it
is removed from the wheel.)
The power switch has two functions. One
is to turn wheel on and off. The other is
a reset function. This wheel has a safety
feature for overload. In order to reset, op-
erator must switch off and on again. (Don't
forget to press the pedal all the way down
“STOP” before turning switch back on.)
①
Switch the on switch to the off position
(refer to diagram).
②
Return the foot pedal to the off
position(refer to diagram).
③
Turn the power switch back on.
stop
stop
faster
①
③
Use caution when performing any mainte-
nance, inspection, and adjustments.
stop
①
Press the pedal all the way
back to stop wheelhead.
If you change a switch to counter clockwise,
wheelhead will be stopped.
After pull the lever all the way back and
move the lever toward, turn wheelhead
counter clockwise.
OFF
②
Change the direction with a switch.
③
Turn on a changeover switch
to select direction.
A
B
②
Turn the power switch on.
Power switch flash.
①
Please check the lever handle
all the way back to stop position.
ON
①
Press the pedal all the way
back to stop wheelhead.
②
Turn the power switch off.
④
Press the pedal forward from the
stop position to increase speed.
Step backward to reduce speed.
stop
②
Foot Pedal Tension Adjustment.
Loosen nuts on the right side of foot
pedal in order to adjust the pressure
needed to move the pedal.
Nut
How to change Wheelhead Direction
Ａ…Clockwise
Ｂ…Counter clockwise
Maintenance
Foot Pedal Operation Starting and Stopping
Foot Pedal Operation Power Switch
・
Start
・
Stop
