8
USING THE VR KEYPADS WITH WIEGAND
The VR43 & VR62 can be used with any standard wiegand and
most non standard wiegand controllers. The site (facility) code
can be set from the keypad itself (refer to the Wiegand Options
sections on page 9) and the wiegand data is fully configurable
with up to 64 bits of data. The VR keypads also support
controllers that require burst mode format wiegand.
The Pink wire needs to be connected to 0V (the Black wire) to
set Wiegand output mode (unless the unit has been
programmed to force it into Wiegand mode via memory 005
(refer to the Wiegand Options sections on page 9)
To use the keypad in wiegand (non burst) mode, press the code
then the
#
key. The keypad can be set up to automatically
send the code after a given number of key presses by setting
memory 007 (refer to the OPTIONS section on page 8).
VR TO WIEGAND WIRING DIAGRAM
Remember to press
#
after the code to send it unless memory
007 has been set to auto send after a given number of keys.
