6
USING THE VR KEYPADS WITH PRESCO™
The VR43 & VR62 can be used to perform all the functions of a
standard Presco PRE keypad. The only difference in operation
is the use of the
#
key instead of the
E
key.
The
#
key is a dual purpose key. When it is pressed as the first
key in a code sequence it generates a #, when pressed as a
subsequent key it then becomes the
E
key.
Should it be necessary to generate a # in the middle of a code
sequence then you must press and hold down the
*
key, press
the
#
key then release both keys.
To use the keypad in Presco™ mode, press the code then the
#
key. The keypad can be set up to automatically send the
code after a given number of key presses by setting memory
007 (refer to the OPTIONS section on page 8).
Example Code Sequences
PRE sequence
VR equivalent
1.
* 000
1
E
* 000
1
#
2.
1234
E
1234
#
3.
# 000
E
# 000
#
Remember to press
#
after the code to send it unless memory
007 has been set to auto send after a given number of keys.
