Nicols Blue Laser, User Manual

Page: 2 / 8

1. GENERAL INSTRUCTIONS
a. UNPACKING
Thank you for purchasing this product. Please read the user guide for safety and operations information before using the
product. They contain important information about the security of the facility and on the use and maintenance of equipment.
Keep this manual for future reference. In case of sale of equipment to another user, it is important that this manual is attached to the
equipment to the new user has the necessary information to use and can read the warnings on safety.
It is essential that the user duly follows the safety instructions and warnings
mentioned in that user manual. The dealer won’t
be able be responsible for the defaults or any other problems due to the mishandling from the user and the non following of
the instructions included in that user manual.
This product is suitable for creating perfect laser programs and high-quality laser effects.
This unit is designed to produce decorative effect lighting and is used in light show systems.
This product is a so-called show laser emitting radiation with a wavelength spectrum and producing lasers for shows. Please refer to the
safety instructions specific for lasers.
Before any first use, unpack the set and make sure there was no damage during transport. Check for missing any part supplied with the
laser:
- 1 x BLUE LASER
- 1 x POWER CABLE
- 1 x USER MANUAL
b. GENERAL SAFETY INSTRUCTIONS
This fixture must be earthed to in order to comply with the safety regulations and to avoid any electrical shock.
Before using, please be assure that the voltage is appropriate with the information mentioned at the rear panel of the unit. Ot
avoid any shock hazard, do not open or remove the cover.
This unit is designed for indoors use. Do not expose the unit to rain or moisture.
The working temperature of the unit is from 18 to 30°C. Do not use it at higher temperature.
Do not switch on and off many times to avoid reducing the life duration of the fixture.
Do not use the unit for more than 4 hours in order not to decrease the life duration of your fixture.
Always unplug the unit when we do not use it for a long time or before servicing.
Do not place metal objects or spill liquids in/over the unit. If it occurs, please disconnect the unit from the mains at once.
Keep the device away from flammable or hot sources.
The fixture should be placed in a ventilated area and fixed at 50 cm at least from the walls.
Do not cover the ventilation openings as it may result in overheating.
Do not use the unit id dusty environment. Please use soft cloth to remove dust that would be place in the external lens. Clean the unit
regularly.
Keep away from children or any non qualified persons.
During the installation of the units, do not let the inexperienced people come around and operate the device.
Make sure that the area below the installation is free from unwanted persons.
The installation should be carried out qualified persons only according to the regulations for safety rules.
Do not remove the stickers placed on the unit. It is forbidden to make any unauthorized modifications to the unit due to safety reasons.
If some parts are visibly damaged (power cord, lens, plug, casing brackets), please do not use the unit and contact your dealer
The unit does not have user serviceable parts inside. Refer to qualified persons or contact your dealer.
Always use parts of same type.
Never repair a fuse or bypass the fuse holder.
Please use the original packaging for transporting the device.
In the event of serious problems, stop using the device contact your dealer. Do not open the cover.
Never look at the light source directly! Do not use the unit effects in the presence of persons suffering from epilepsy.