Nice Mindy A100F, Instructions And Warnings For The Fitter

Page: 5 / 13

GB
5
Courtesy light
F1
Mains power supply
FORCE
MIN
MAX
L N
1 2
4 3 5
CLOSE
FCC
STEP - BY STEP
SCA 24Vac common
M1
Phototest
Services
STOP PHOTO OPEN Constant resistance STOP 8.2K
Ω
(sensitive edge)
F2
14 9
CLOSE COMMON OPEN
7 6 8
24V
0
10
24V
11 12 13 15 17 16 19 18 20
TL
21
22
TP
OK
AERIAL
Radio
receiver
FCA
Flashing light
OVERHEAD
GARAGE DOOR
SLIDING GATE
{
{
2.3.1) Wiring diagram
Terminal Functions Description
1-2 Power supply mains power supply line
3-4 Flashing light Output for connecting flashing light to mains voltage (Max. 100W)
5-6 Courtesy Light Output for connection of a mains voltage lamp (Max 100W)
7-8-9 motor motor output (Max 500VA)
10-11 24 Vac 24 Vac services power supply: Photo, Radio, ecc. (Max. 200mA)
12 Phototest Phototest output: power supply to photocell transmitters (Max. 100 mA)
13 Common Common for all inputs
14 A.C. Light 24 Vac output for open gate indicator light (Max. 2W)
15 OPEN limit switch Input for connection of the OPEN limit switch.
16 CLOSE limit switch Input for connection of the CLOSE limit switches.
(15-16) Stop The “Stop” input is obtained by connecting an NC-type contact serially with the limit switches
(see wiring diagram).
17 Photo Input for safety devices with NC contact (e.g. photocells)
18 Step-by-step Input for cyclic command (OPEN – STOP – CLOSE – STOP)
19 Open Input for opening function (OPEN – STOP – OPEN)
20 Close input for closing command (CLOSE – STOP – CLOSE)
21-22 constant resistance Stop Input for “constant resistance Stop” 8.2k Ω (e.g. sensitive edge)
2.3.2) Description of the connections
The following table provides a brief description of the possible control unit output connections.