EN
11
– Inglese
05
05
5
sec.
5
sec.
3
3
=
=
01
02
1
sec.
PRG
03
1
sec.
PRG
2
2
5
sec.
3
5
sec.
04
2
5.13 - Resistive sensitive edge (can only be connected to the photocell couple) (ref. paragraph 6.4)
Before starting the procedure, bring the awning/shutter to a point half-way along its course.
01.
Keep the
n
key pressed and wait for the motor to perform 2 movements. Now release the button.
02.
Keep the
n
key pressed and wait for the motor to perform 4 movements. Upon completion, release the key.
03.
Keep the
n
and
s
keys pressed simultaneously and wait for the motor to perform 2 movements. Upon completion, release the key.
04.
Then choose the desired function you wish to assign to the motor and keep the key combined with the chosen function pressed; wait for the motor to perform 3
movements and, upon completion, release the key.
• after the intervention of the edge, the motor performs a brief reverse movement and stops (= press the
s
) key.
• after the intervention of the edge, the motor stops without performing the brief reverse movement (= press the
n
) key.
• after the intervention of the edge, the motor stops and then starts again in the upward direction
(= press the
t
) key.
5
sec.
01
03
02
5
sec.
5
sec.
04
05
05
5
sec.
=
...
“
1
”
5
cm
2
4
2
05
5
sec.
5
sec.
3
3
3
“
1
”
=
=
N.B.
– When performing the procedure, you can cancel the programming at any time by keeping the
n
and
t
keys pressed simultaneously for 4 seconds Alternatively,
do not press any keys and wait 60 seconds for the motor to complete 6 movements.
To delete the setting you have selected and reconfigure the input for a climate sensor, you must delete the positions of the limit switches “0” and “1” (section 5.9).