English –
6
4.4.2 - Maximum number of transmitters that can be memorised
The motor has
30 memory locations
. A location can either memorise a single
transmitter (in Mode I) or a single button (in Mode II) or a single wireless climate sen-
sor (up to 5 sensors).
4.5 - Programming multiple motors with a single
channel transmitter
In such cases, to avoid the need to disconnect all motors you do not wish to pro-
gram, proceed as follows:
1)
- run procedure A.1 to memorise the first transmitter on the motor you wish to pro-
gram;
2)
- run procedure A.2 to deactivate all other previously memorised motors, which
you do not wish to program;
3)
- program the motor as required, leaving the limit switches to last
(*)
;
4)
- at the end, reactivate the previously deactivated motors by pressing
ESC
.
–––––––––
(*) Note
– If you wish to program the “movement duration”, run the procedure in
question (A.14) only after having programmed the limit switches.
4
