15
– English
A.12 - Adjusting the awning’s cruise speed
NOTES AND WARNINGS
•
For the values of the three options (minimum, nominal and maximum speed), see “Technical characteristics”.
• Todetermine whether the option chosen for the cruise speed of the awning is compatible with the characteristics of the your awning (weight, roller dimensions, torque),
refer to “Technical characteristics”.
• The “nominal speed” setting is the factory setting.
1
2
3
4
PRG
(x
1
)
2
PRG
(x
1
)
2
=
5
sec
3
Press and release
the button (
1 time
);
count 2 movements.
Press and release
the button (
1 time
);
count 2 movements.
Hold down the but-
tonand
release it after
5
seconds
;
count 3 movements.
4
continues
Select the desired op-
tion and program it as
follows
(x
...
)
3 OPTIONS:
1 press
= sets
MINIMUM speed
2 presses
= sets
NOMINAL speed
3 presses
= sets
MAXIMUM speed
.
Press and release the button
the number of times
indicated in the option you have chosen;
4
5
end
7
sec.
?
1
/
2
/
3
/
=
5
sec
3
After about 7 seconds, the motor performs a num-
ber of
movements
equal to the number of pulses
entered.
Hold down the buttonand
release it after
5 seconds
;
count 3 movements.
A
GENERAL INFORMATION ABOUT PROCEDURES “A.12”, “A.13”, “A.14”
The “Cruise speed” (procedure A.12), “Acceleration/deceleration of the movement” (procedure A.13) and “Movement dura-
tion ” (procedure A.14) functions allow you to completely customise the movement of the awning, allowing you to align mul-
tiple awnings of different sizes, with different diameter rollers (among other effects), or make the awning run more quietly.
• The “Movement duration (procedure A.14)” and “Cruise speed (procedure A.12)” functions are interdependent:
the last
function to be set determines the awning’s actual cruise speed.
• After setting the
movement time
(procedure A.14), the system automatically adjusts the
cruise speed
(while accounting
for
the acceleration/deceleration
values) to ensure that the movement lasts exactly the set time.
If you then change the
acceleration/deceleration
settings (procedure A.13), or the
limit positions
(procedure A.3 / A.4),
the movement duration
remains
unchanged and the system adjusts the
cruise speed
accordingly.
• When setting the
movement duration
(procedure A.14), if the resulting
cruise speed
is outside the allowed range (see
the values given in “Technical specifications”), the motor reports the error by moving 6 times at the end of the procedures
(A.3 / A.4 / A.13), and automatically restores the
cruise speed
to its nominal value.
• After you have set the
cruise speed with procedure A.14
, changing the
limit positions
(procedure A.3 / A.4) or
accel-
eration/deceleration
settings (procedure A.13) may set the
cruise speed
outside the allowed range (given in “Technical
specifications”). If so, the motor will move 6 times to report the error at the end of the procedures (A.3 / A.4 / A.13), and
will automatically restore the nominal
cruise speed
.
