English –
17
EN
8
TECHNICAL SPECIFICATIONS
WARNINGS:
•
All technical specifications stated herein refer to an ambient temperature of 20° C (± 5° C). • Nice S.p.a. reserves the right to apply modifications
to products at any time when deemed necessary, maintaining the same intended use and functionality.
Model
NDCC2000
NDCC2100
NDCC2200
Type
Control unit for single-phase or three-phase motors with Nice mechanical or electronic limit switches
Power supply
Three-phase
3~400V AC / 3~230V AC (+10% - 10%) 50/60Hz
Single-phase
1~230V AC (+10% - 10%) 50/60Hz
Motor max power
2.2kW
Power in Standby
< 5W
Fuse on power board
F1: 500 mA Type F; F2, F3, F4: 6.3A Type T
Output 1 (with NDA040)
Voltage free contact (relay), programmable with Oview
Output 2 (with NDA040)
Voltage free contact (relay), programmable with Oview
Services output
24 V DC (max 100 mA) between input 1 (com) terminal and gnd (-) STOP 8K2/OSE terminal (see
Fig. 7
)
“STOP SAFETY EDGE” Input
For contacts that are normally closed, normally open or of the 8.2k Ω constant resistance type or the OSE
optical type; in auto-recognition (a variation from the memorised status causes a “STOP” command)
“ALT” Input
For Normally-Closed (NC) contacts on the safety circuit
(OPEN) input
For Normally Open (NO) contacts
(CLOSE) input
For Normally Open (NO) contacts
ING1 (photo) Input
For Normally-Closed (NC) contacts, programmable with Oview
Radio connector
SM connector for SMXI, SMXIS, OXI or OXIT receivers
Radio AERIAL Output
52 ohm for RG58 or similar cables (maximum 10 m)
Programmable functions
Functions programmable via the Oview Programming and Control Unit
Auto-recognition functions
Auto-recognition of the “STOP” type of device (OSE or 8.2KΩ resistance)
Operating temperature
-20°C - +50°C
Use in acid, saline or potentially
explosive atmosphere
No
Protection class
IP55
Vibration
Installation free from movement, (e.g. on a brickwork wall)
Dimensions
310 x 210 x 125 mm
Weight
2.5 kg
Summary of Contents for D-Pro Action Series
Page 2: ......
