Table 12. Smart DC Controller - Installer Menu Functions
User Menu
Display
Setting Options
(Bold = Factory
Settings)
Menu Tasks and Explanations
Associated
DC Controller
Display
Connections
WT 0
Gate Weight (LB)
0 = Gate disabled
1, 2, 3, or 4 Gate
weight selections
appear in pounds.
Select gate's weight range in pounds.
Correct gate weight allows operator to
determine appropriate acceleration and
deceleration rates.
(N/A)
LN 0
GATE LENGTH (FT)
0 = gate disabled
1 = 0 to 8 feet
2 = 8 to 12 feet
3 = 12 to 16 feet
4 = 16 to 20 feet
Select the gate’s length in feet. The
installer must designate the gate’s
length before the operator will function.
"Configuring the Setup Menu" on
gate length allows the operator to
determine the appropriate acceleration
and deceleration rates.
(N/A)
OS 5
OPEN SPEED
5
1 through 10
1 = slowest speed
10 = fastest speed
The range 1 through 10 varies the speed
of the motor and the gate opening
speed increases as you go up the
number scale. A setting of 1 slows the
gate travel to approximately 15 seconds.
A setting of 10 speeds up gate travel
to approximately 10 seconds. Refer to
"Adjusting the Gate Speed" on page
(N/A)
CS 5
CLOSE SPEED
5
1 through 10
1 = slowest speed
10 = fastest speed
The range 1 through 10 varies the speed
of the motor and the gate opening
speed increases as you go up the
number scale. A setting of 1 slows the
gate travel to approximately 15 seconds.
A setting of 10 speeds up gate travel
to approximately 10 seconds. Refer to
"Adjusting the Gate Speed" on page
(N/A)
FD 0 (OFF)
Load Factory Defaults
0 = custom user
settings
1 = reload factory
default settings
Globally restores all menu settings
back to new operator status. Select
setting 1 to return operator to factory
defaults.
NOTE:
If factory defaults are restored,
the UL usage class, handing, gate
weight, and any other modified
menu settings will need to be
reprogrammed.
(N/A)
DISPLAY AND MENU OPTIONS
MX3640-01 Rev. E ©2020
SwingSmart DC Programming and Operations
hysecurity.com | 800-321-9947
61
