11
11
Step 7:
Control Box Installation
Mount the control box so that (8 ft) will reach
the motor.
Do not mount the control box
where the person using the push button
on side of the box can come in contact
with the gate.
Use mounting hardware
capable of supporting the weight of the
control box with the battery installed.
Set battery inside of control box with
terminals toward the front
(Do not use any
battery with side terminals).
Step 8:
Connect harness to motor
Route the cable from the control box to the operator. Connect the cable to the
side of the terminal block on the operator as shown. The operator in this manual
is set up for left side installation (from inside looking at gate in closed position).
For right side installation reverse the open and close wiring and reverse the mo-
tor leads.
OPEN LIMIT
(ORANGE)
GROUND
(GREEN)
CLOSED LIMIT
(WHITE)
MOTOR (+)
(RED)
MOTOR (-)
(BLACK)
ENCODER
(BLUE)
ENCODER
(YELLOW)
