doc.000 012018 4/7
2. Installing your Autolift electric
Position the assembled unit adjacent to the bath and ensuring the chair is central and parallel to the
bath, lower the chair to within 25 mm (1") of the bottom and the end of the bath (see Fig. 2).
Using the handset, raise the chair up and fully rotate, ensuring there is adequate clearance for the
bather's legs. When the best position has been ascertained, mark the position of the base on the
floor, ensure the base does not move.
Remove the elevating unit from the base plate socket, by pressing in the plunger and pulling outwards
(see Fig. 3).
Summary of Contents for Autolift electric
Page 1: ...Installation instructions...
