9
We reserve the right to make technical changes
83050406cUK – Translation of the operating manual
NIBE
TM
AP-AW10
transport to installation loCation
Always comply with the following safety information
during transport:
WarnIng!
several people are required to transport
the unit. Do not underestimate the weight
of the unit.
overview “Technical data / scope of delivery”,
“General unit data” section.
WarnIng!
the unit can tip when being removed from
the wooden pallet and during transport.
this can result in personal injury and
damage to the unit.
– take suitable precautionary measures
to eliminate the danger of tipping.
attentIon
Never use components and hydraulic connec-
tions on the unit for purposes of transport.
attentIon
do not damage the hydraulic connections under
any circumstances.
attentIon
do not tilt the unit more than a maximum of 45°
(in any direction).
To avoid damage during transport, you should transport
the unit to the final installation location in its original
packaging (with packaging on the wooden pallet), using
a lifting truck.
If it is not possible to transport the unit to the final
installation location using a lifting truck, you can also
transport the heat pump using a hand truck.
transport with a hand truCk
In order to reduce the weight of the unit for additional
transportation, we recommend using a hand truck to
remove the lower side walls and the lower front wall
prior to moving.
p
Remove packaging and set extra box aside (will be
needed later on!)…
lift unit from pallet.
Remove lower side panels and bottom front panel
of the unit…
•
To do so, loosen the quick-release screws. Turn
counter-clockwise 90°.
•
lift side panels and set aside in a safe place…
push hand truck under the unit (= rear side of unit).
Alpha InnoTec GmbH
EPP-Isolationshülle
31.01.2008