16
NIBE
TM
AP-AW10
We reserve the right to make technical changes
83050406cUK – Translation of the operating manual
position the wire mesh grille in the assembly
frame…
Set the weather / rain guards on the assembly frame
in the wall duct and screw down…
8 x
notICe.
If the wall duct is positioned above ground level,
attach the weather guard.
If the wall duct is positioned in a light well (be-
low ground level), attach the rain guard.
Repeat – the process on the air output side.
sCreen frame assembly
Screw the screen frame to the wall ducts on both the air
intake and output sides.
notICe.
The screen frame serves no technical purpose; it
is present solely to create a seamless transition
to the wall duct.
wire mesh grille and weather/rain guards
assembly
proceed as follows:
Remove the wire mesh grille and the weather / rain
guards as well as the assembly frame and fastening
material from their respective boxes…
from the outside of the house inwards, insert the
assembly frame into the wall duct on the air intake
side and secure with screws…
8 x