Nibe AG-BU10, Manual, Page: 20 / 55

38 39
Setup reset
For setup reset send the SMS “90” to the controller. NIBE AG-BU10 responds
with SETUP report:
“Owner: All; Users: All; Värmepump: All; Param: 5, 24, 180, 30”.
This means Owner is not specified; all users can send commands;
the pump model is not specified, call commands are set to default;
“LOW TEMPERATURE” message will be sent when room temperature drops
below 5 °C , “NO POWER” message blackout is in 24 hours and the “SERVICE”
alarm message interval is 180 days; “HIGH TEMPERATURE” message will be sent
when room temperature rises abowe 30 °C
Setup SMS command
you send Response
SMS Controller function you activate
90 SETUP
Setup reset (Owner deleted.)
and controller restart
93 VERSION
Owner number activation.
For example: “93+495012345”
User setup
To set User numbers start your command SMS with “91”, followed by the mobile
phone number of the User. For example: “91+495012345” or “915012345” to
enter User1 number where “5012345” is the cell phone number of User1 and +49
is the country code. User numbers (Owner, User1, User2) can be international
(with the “+” symbol and country code) or local. The length of the number must
be between 3-16 symbols
(“+” counts as one symbol). Multiple commands can be combined into one
SMS. When a User has been set, NIBE AG-BU10 responds with a SETUP report
message.
Setup SMS command you send Controller function you activate
91xx* User1 number entry (to delete: 910)
92xx* User2 number entry (to delete: 920)
93xx* Owner number entry (to delete: 930)
*xx marks the place of mobile phone number