26
27
What NIBE AG-BU10 does?
NIBE AG-BU10 is a heat pump controller you operate with a mobile
phone. It is compatible with NIBE ARIA heat pumps and all mobile phones.
The easiest way to use NIBE AG-BU10 is with Smartphone, using the
NIBE ARIA app downloadable from the Google Play (for Android
phones ) or App Store (for iPhone). It can also be controlled with regular
mobile phone text messages (SMS). NIBE AG-BU10 allows you to have
long distance control over the mode of the pump, room temperature and
fan speed settings. NIBE AG-BU10 can also inform you about low room
temperature, power failures and heat pump service intervals.
AG-BU10 function is that it sends information from AG-BU10 to the heat pump,
but AG-BU10 can not receive information from heat pump.
Latest information obtained from AG-BU10 is last sent message to the heat pump,
not the heat pump true status.
Notice of power failure comes from the AG-BU10 connection (battery charger)
status of the powersupply. Current room temperature specified are AG-BU10
measured temperature where it is placed.
This equipment complies with the essential requirements and other relevant
regulations in EU Directive 1999/5/EC (see nibe.eu).
Indicator lights
The controller has 3 LED indicators and 2 buttons
for easy setup. It has also 2 infrared LEDs that
transmit your commands to the heat pump.
LED 1 - Power
on
switched on
blinking
no power, working on battery
off
switched off
LED 2 - GSM network LED
on
restart time, SIM missing or SMS processing
1 blink
(3 s interval) normal status
3 blinks
(3 s interval) no signal from mobile phone
or not connected to a mobile network
blinking
(500 ms interval) data call session is active
LED 3 - IR (InfraRed) communication LED
blinking
transmitting by IR
LED 1 - Power
LED 2 - GSM
network LED
LED 3 - IR LED
Summary of Contents for AG-BU10
Page 1: ...1 Manual NIBE AG BU10...