28
HK 200S
HK 200S-6
Settings
Flow-through heater has maximum capacity of 9 kW
(3 phases). The capacity of the fl ow-through heater
is divided into 3 gears. Possible operating capacities
are as follows: 3, 6, and 9 kW. Maximum capacity of
the fl ow-through heater is set in menu 5.1.12.
Auxiliary preheater - capacity
max
Emergency mode
Emergency Mode Thermostat
When the SMO automation is in the emergency mode
(SF1 is set as ), only the most necessary functions
are active.
•
The volume of domestic hot water is limited.
•
Load sensor has not been connected.
•
Constant temperature in the supply pipeline;
more information to be found in the Chapter w
Emergency Mode Thermostat.
In the emergency mode, the supply temperature is
set using a thermostat (T1). It must be set according
to the demand of the circuits in operation.
The available regulation range is between 6 and 67
�
C. Remember that for floor heating, the settings
must be min. 20
�
C, max. 35-45
�
C in order to pre-
serve heat comfort in the room and assure effective
system operation.
EMER
GENC
Y
SMO
SMO
AMS 10-6
Chapter 5 |
Electrical connections
