NIBCO, Inc.
7
1516 Middlebury Street • Elkhart, IN 46516 USA • 888-446-4226
PC-10M Battery-powered Pressing Tool
Operation
(cont’d)
For 1/2", 3/4" and 1" copper tubing sizes:
1. Select the proper pressing jaw for the intended
application. Examine the jaw for wear, damage, dirt
and copper buildup. Clean the compression area if
dirty and replace if worn or damaged.
2. Depress lock pin 1 (see views below) and rotate
counterclockwise to disengage the pin on the
pressing tool.
3. Install the jaw into the pressing tool and align
mounting hole in jaw with lock pin. Depress the lock
pin to secure the jaw (see views below).
Before changing the pressing jaws,
remove battery to avoid unintentional
operation.
Failure to observe this warning could
result in severe injury or property
damage.
1
2
1
4. Compress the ends of the jaw together to open the
jaws and locate the jaws around the fitting to be
pressed (see view below).
