NIBCO, Inc.
2
1516 Middlebury Street • Elkhart, IN 46516 USA • 888-446-4226
PC-10M Battery-powered Pressing Tool
KEEP THIS MANUAL
Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Purpose of this Manual .................................................. 2
Warranty ......................................................................... 2
Important Safety Information ......................................3-4
Identification ................................................................... 5
Specifications ................................................................. 5
Operation .....................................................................6-8
Maintenance ................................................................... 8
Troubleshooting .............................................................. 9
Description
The PC-10M Battery-powered Pressing Tool is a
hand-held, self-contained tool intended to press 1/2"
through 1" copper NIBCO press fittings and valves onto
type K, L, and M hard-drawn copper tubing.
Safety
Safety is essential in the use and maintenance of NIBCO
tools and equipment. This manual and any markings on
the tool provide information for avoiding hazards and
unsafe practices related to the use of this tool. Observe
all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all users with
the safe operation and maintenance procedures for the
tool:
PC-10M
Battery-powered Pressing Tool
with 120-volt Charger and (2) batteries
PC-100M Battery-powered Pressing Tool
with 120-volt Charger, (2) batteries
and 1/2", 3/4" and 1" Pressing Jaws
Keep this manual available to all users.
For additional copies of the manual, visit the NIBCO
website: www.nibco.com
Warranty
For warranty information on the NIBCO pressing tools,
contact NIBCO technical services at 1-888-446-4226,
or visit the NIBCO website: www.nibco.com.
Do not discard this product or throw away!
For recycling information, go to www.nibco.com.
All specifications are nominal and may change as design improve-
ments occur. NIBCO, Inc. shall not be liable for damages resulting
from misapplication or misuse of its product.
Tellus is a registered trademark of Shell Oil Company.
